How to Turn Your Metal Building Into A Guest House

Metal carports are not only designed for residential, agricultural, and industrial use. For the contrary, the residential sector is also frequently adopting pre-engineered buildings and metal frames to produce weather resistant, affordable and notable houses. However, there are plenty of queries relating to how a metal carport can be retrofit in livable space. The reasons for retrofitting a metal building into a room or livable space are extensive. It increases property resale value. House owners can earn more by adding a rental unit to their property. As a matter of fact, you can use metal garage kits to convert your garage into a guest house.

From a storage place to guest house, converting an unused place of a metal barn using metal barn kits is a great idea. Converting a dull and vacant place into an attractive and efficient living room makes sense. Followings are a few ideas to convert a metal building into a guest house:

1. Make sure it is located in the right place

If a metal property is not already on a commercial or a residential area make sure it in proper zone. Make sure it is not getting too much or too less sunlight.

2. Prepare the foundation

The ideal foundation of your guest house depends on in which area is your property and what type of soil is around. Most people use concrete to hold the poles.

3. Think about energy efficiency

For lifetime maintenance of your guest house keep energy efficiency, adequate insulation and heating /cooling systems at the forefront of your building plans. The efficiency and durability of a building increases when its properly built and maintained.

4. Start with the roof

The first thing, to begin with, is the roof. If you have old metal carports installed in your home, check if they are worthy of human occupants. Do the needed repair or replacements to the old one and if required but a new one. Luckily the metal carports come with a warranty of over 20 years and will last much longer if maintained properly. The calculation of load, if you live in the area of heavy snowfall will yield different results than before as someone is going to live there now.

5. Use adequate framing & insulation

Start with framing the ceiling and the interior walls of the metal carport and then insulate the area using spray foam. Insulating the room with spray foam not only make it energy efficient and cozy but also diminish the outside noise.

6. Take care of proper lighting and ventilation

Keep your new guest house airy and bright following proper lighting and ventilation techniques. You can add windows and skylight wherever possible. Also, you must make sure that adequate ventilation system is installed for proper air flow.

7. Decide on plumbing and electricity

If you are planning to add toilets or sinks with your guest room, then plan accordingly where to put them. Planning early about the plumbing and electricity issues will save your time. This should be done before the framing and insulation of the interior walls.

8. Finish the interior

In addition to the insulation of the interior walls, add some extra insulation which will act as a barrier between you and the walls of the guest house. The extra insulation will diminish the rain noise providing more better soundproofing to the room.

With a metal building guest house, you will not need to worry about the mold and foundation problem. It will provide great resistance to snow, wind, rain, and earthquake. You can yourself easily convert your preinstalled metal carport into a living place using metal building kits. But on the contrary, hiring a professional to do this job is always the best choice.

Metal carports direct will provide you more economical and stronger prefabricated steel buildings. Whether you need a metal garage, a storage place or a residential metal carport, metal carports direct is the perfect solution for you.